Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag on the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Airbag

Removing the driver's side airbag system for extraordinary maintenance on a 2014 Fiat 500 vehicle is a much simpler operation than you might think. In fact, all you need to do is turn the steering wheel and position it vertically, then insert a screwdriver or a long iron tool into the rear hole and push the lever inside. Once the tab is pressed, the system will be removed and you can extract it. During this operation, it is advisable to disconnect the vehicle's battery to prevent the system from accidentally activating.

Posted on 17 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel airbag of the Fiat 500 X
How to remove the steering wheel airbag of the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Today we will explain how to remove the steering wheel airbag from the Fiat 500 X. To remove the airbag, we need to insert a flat-head screwdriver in…
How to Remove the Airbag from a Fiat 500
How to Remove the Airbag from a Fiat 500
Fiat 500 (2007-2021 / 312) Before you can begin, open the driver's side door of your Fiat 500. Start by unscrewing and removing the screws that secure the lower cover of the st…
How to remove the driver's side airbag from the Fiat 500 L.
How to remove the driver's side airbag from the Fiat 500 L.
Fiat 500 (2012-2023 / 500 L) Today I will explain how to remove the airbag from the steering wheel of the Fiat 500 L. To remove the airbag, we need to insert a flathead screwdriv…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos