Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light of the Ford Fusion North America MK2.

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Service warning light

To remind us to change the motor oil in the Ford Fusion, a reminder appears on the display to the right of the dashboard. After completing the replacement, we reset the notification system. We turn on the instrument panel, press the ok button on the left side of the steering wheel, then press the right arrow. In the menu that appears, we select Setting with the down arrow. We select and then choose Vehicle. Within this menu, we select Oil life reset, confirm, and then hold down Ok until the message confirming the reset appears. We navigate back to the speedometer screen.

Posted on 18 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Ford Fusion North America Mk2
How to Change the Engine Oil on the Ford Fusion North America Mk2
Ford Fusion North America (2013-2020 / MK 2) This guide shows how to perform an engine oil change on the Ford Fusion North America Mk2. After safely lifting the vehicle, unscrew the fasteners of…
How to reset the service light on the Ford Fusion
How to reset the service light on the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) Today we will explain how to reset the service light related to the car service on a Ford Fusion vehicle produced from 2013 to 2020. After performing…
Service Reset on a Ford Fusion
Service Reset on a Ford Fusion
Ford Fusion North America (2006-2012 / MK 1) In this very short video today, you will see how to perform a service reset on a Ford Fusion, first-generation sedan, without using diagnostic tools,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos