Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor in the Ford Ranger pickup truck?

Model: Ford Ranger T6, PX, P375 - Years 2011-2023
Part: Starter motor

In this tutorial we can see how to replace the starter motor in the Ford Bronco pick-up, a simple operation if you have good manual skills. First of all, we open the engine hood, then disconnect the negative terminal of the battery and raise the front left side taking all necessary safety measures. We then remove the wheel, remove the indicated cover and disconnect the power poles. At this point, we unscrew the bolts securing the starter motor, separate it from the support, position the replacement and follow the reverse procedure.

Posted on 21 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Ford Ranger pick-up?
How to reset the service in the Ford Ranger pick-up?
Ford Ranger (2011-2023 / T6, PX, P375) In this tutorial we can see how to reset the service in the Ford Ranger pick-up, an extremely simple and fast operation, to be done only once all sch…
What is the fuse layout of the Ford Ranger pickup truck?
What is the fuse layout of the Ford Ranger pickup truck?
Ford Ranger (1998-2011 / MK 3) If some devices in our Ford Ranger pickup have suddenly stopped working, we can first check the status of the related fuses, whose diagrams are indic…
Where is the oil filter located in the Ford Ranger pick-up?
Where is the oil filter located in the Ford Ranger pick-up?
Ford Ranger (2011-2023 / T6, PX, P375) In this video, we can see where the oil filter is located in the Ford Ranger pickup truck and how to proceed in case we need to replace it. This oper…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos