Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the high-pressure fuel pump of the Ford Escape 2.0L L4.

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuel pump

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the high-pressure fuel pump of the Ford Escape 2.0L L4. First, we open the hood of the car and start disassembling and removing the upper protection; the fuel pump is located on the top of the engine, where we will disconnect the various pipes, as shown in the video.

At this point, we unscrew the fixing screws of the high-pressure pump, disconnecting the electrical connector to remove it; we replace it with the new original one, also replacing the pipes if necessary.


Posted on 1 June 2025 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a Ford Escape?
Ford Escape (2001-2007 / MK 1) To replace the fuel filter on a Ford Escape, access the underside of the vehicle, as the filter is located in this area, near the rear seat and next …
Replacing the Timing Belt on the Ford Escape 1.6
Replacing the Timing Belt on the Ford Escape 1.6
Ford Escape (2013-2019 / MK 3) Follow the instructions on how to remove and replace the timing belt on the Ford Escape 1.6. In this case, the engine block is already removed from t…
Where is the fuel pressure sensor located in the Ford Escape?
Where is the fuel pressure sensor located in the Ford Escape?
Ford Escape (2001-2007 / MK 1) In this video, you can see where the fuel pressure sensor is located in the Ford Escape and how to proceed if you need to replace it. As shown, the s…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos