Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : How to replace the fuel pump in the Ford Escape?

Ford Escape - Video tutorial

Model: Ford Escape MK 1 - Years 2001-2007
Part: Fuel pump
Operation: How to replace the fuel pump in the Ford Escape?

In this tutorial, we can see how to replace the fuel pump in the Ford Escape, a very simple and quick operation. Before doing this, make sure that the key is not inserted so that we can work safely. Let's start by going to the back of the vehicle and removing the left rear seat, then open the door by unscrewing the 4 fixing screws. Next, disconnect both the power connector and the two fuel lines, unscrew the large outer ring, and remove the pump from the tank. To install the replacement, simply follow the reverse procedure.


Posted on 5 August 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos