Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuel pump relay located in the Ford Escape?

Model: Ford Escape MK 2 - Years 2008-2012
Part: Fuel pump

In this video, you can see where the fuel pump relay is located in the Ford Escape, an element to check if it suddenly stops working and the fuse is in good condition. As shown, the relay is positioned in the box inside the engine compartment, protected by the black cover located right next to the battery. It is the first one at the top left of the lower block when looking at the vehicle from the front. To check its status, simply replace it with the relay located below it. If faulty, make sure to use a replacement with the same specifications.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump in the Ford Escape?
How to Replace the Fuel Pump in the Ford Escape?
Ford Escape (2001-2007 / MK 1) In this tutorial, see how to replace the fuel pump in the Ford Escape, a very simple and quick operation. Before proceeding, remove the indicated rel…
Guide to disassembling the high-pressure fuel pump of the Ford Escape 2.0L L4.
Guide to disassembling the high-pressure fuel pump of the Ford Escape 2.0L L4.
Ford Escape (2013-2019 / MK 3) The instructions in this guide will show us how to disassemble and replace the high-pressure fuel pump of the Ford Escape 2.0L L4. First, we open the…
How to Replace the Fuel Pump in a Ford Escape?
How to Replace the Fuel Pump in a Ford Escape?
Ford Escape (2001-2007 / MK 1) In this tutorial, you will see how to replace the fuel pump in a Ford Escape, a very simple and quick operation. Before doing this, ensure that the k…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos