Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A defect that affects the Ford C-Max I and concerns the ABS/ESP control unit.

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

A defect that affected the first model of the Ford C-Max I (2003-2010) and secondarily also the II (2010-2019) concerns the ABS/ESP control unit with the warning light on the dashboard and error codes C1095, C1234, C1466 indicating a connection problem or hydraulic circuit issue; other problems were reported with code U0121, meaning loss of communication with the ABS module: all of these issues can lead to the problems mentioned by the youtuber, although in some cases it is possible to repair the control unit instead of replacing it. Check if our car has been involved in Ford recall campaigns, as it happened with some 2008/2010 models.


Posted on 7 June 2025 by ScegliAuto


Related tutorials

Where to Find and How to Access the Fuse Box of a Ford C-Max?
Where to Find and How to Access the Fuse Box of a Ford C-Max?
Ford C Max (2003-2010 / MK 1) Today, we will focus on locating and accessing the fuse box of our Ford C-Max. Start by opening the front passenger door. Then, bend down under the g…
How to Fit the Front Bumper on a Ford C-Max
How to Fit the Front Bumper on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the bonnet of your Ford C-Max. Begin by positioning the front bumper in its housing. Next, secure the rear fastening clips. Onc…
How to Program the Key for a Ford C-Max?
How to Program the Key for a Ford C-Max?
Ford C Max (2010-2019 / MK 2) To program the key for a Ford C-Max, insert the key into the ignition lock. Once inserted, turn it from position 2 to position 3 four times. After co…

    Frequently Asked Questions

    • C Max 2010-2019 - Why is the tire sensor not detected on the Ford C Max? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos