Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure light in the Ford Puma?

Model: Ford Puma MK 1 - Years 2019-2026
Part:

In this tutorial, we can see how to reset the tire pressure light in the Ford Puma, an extremely simple and quick operation, to be carried out only once the correct pressure of each tire has been restored following the indications in the manual. First of all, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, reach the general menu by pressing the appropriate button on the steering wheel, enter "Settings", "Tyre pressure", and perform the reset by holding down the "OK" button. At this point, all that remains is to restart the vehicle and verify that the procedure was successful.

Posted on 10 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Ford Puma (2019-2026 / MK 1) To reset the tire pressure warning light on the Ford Puma, you need to inflate the tires until they reach the recommended pressure value: this value …
Ford Puma (2019-2026 / MK 1) In order to reset the tire pressure warning light on the Ford Puma, you need to inflate the tires to the recommended pressure value: this value is in…
Ford Puma (2019-2026 / MK 1) The tire pressure warning light that appears on the Ford Puma instrument panel can be reset by inflating the tires to the recommended pressure value:…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos