Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Rear Headlamp Bulbs on a Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Headlight bulb

The rear headlamp on this version of the C-Max consists of two pieces, one outer piece fixed to the bodywork and one fixed to the tailgate; to replace the bulbs, you need to remove the headlamp from the bodywork, but this is a very simple operation. Once you open the boot, locate the plastic cover on the trim directly opposite the headlamp, unscrew the plastic fixing nuts of the headlamp and pull it out of its seat, remove the protective cover of the bulb holder and proceed with replacing the bulbs.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs on a Ford C-Max
How to Replace the Rear Light Bulbs on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Below are the steps to remove and replace the rear light bulbs on a Ford C-Max. First, open the rear hatch of the boot and start removing the plastic…
Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…
How to Replace the Front Headlight Bulbs on a Ford C Max
How to Replace the Front Headlight Bulbs on a Ford C Max
Ford C Max (2003-2010 / MK 1) How do you replace the front headlight bulbs on a Ford C Max? Follow this guide: open the bonnet of the engine compartment, remove the plastic inspec…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos