Removing Engine RPM Sensor from Ford

Model: Ford Ford Various
Part: Crankshaft position sensor

This video is currently unavailable

In this video, you will see the main steps to remove the engine RPM sensor from certain Ford models. First, open the bonnet and disconnect the electrical connector located in the intake manifold: to do this, press the tab with a sharp object.

Next, remove the fuel lines located above and the various electrical connectors to detach the fuel pump; this is because sometimes the sensor issue is caused by a different pressure from the pump. The video later illustrates how to replace the air filter.

Updated on 29 March 2026 by ScegliAuto

Other guides you may be interested in

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Pump - Maintenance and repair on other vehicles

Fuel Pump - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

Removing Engine RPM Sensor from Ford

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos