Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Alternator on Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Alternator

How to replace the alternator on a Ford Kuga? Start by removing the lever located at the bottom left of the dashboard and lift the bonnet, securing it. Locate the battery and disconnect the terminals. Remove the front wheel to access the alternator. Use a socket spanner to undo all the securing bolts of the alternator. Once the alternator is removed, extract it from the engine bay. Take the new replacement part and insert it into the appropriate housing, then tighten the securing bolts. Finally, refit the wheel.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Alternator on Ford Kuga
How to Replace the Alternator on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Is the alternator on our Ford Kuga damaged and needs replacing? Here’s how to do it. Open the front bonnet, remove the fuel filter along with all hos…
How do you replace the alternator in the Ford Kuga?
How do you replace the alternator in the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) The component mentioned above plays a truly fundamental role in the car, as it is responsible for recharging the power battery and therefore without …
How to Replace the Timing Belt on a Ford Kuga?
How to Replace the Timing Belt on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) Hello, today you will replace the timing belt on your Ford Kuga. First, open the bonnet and remove the air filter assembly along with the engine cove…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos