Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the alternator in the Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Alternator

The component mentioned above plays a truly fundamental role in the car, as it is responsible for recharging the power battery and therefore without it, the use of the vehicle would be impossible. In this video, we are shown and explained how to proceed, if necessary, with its replacement: After opening the hood, disconnect the power battery cables, then remove the engine cover and continue by removing the right front wheel and the wheel arch, in order to access the belt extraction first and the alternator subsequently, continuing the work from the top of the engine compartment, as shown in the video.

Posted on 11 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace the Alternator on Ford Kuga
Replace the Alternator on Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) How to replace the alternator on a Ford Kuga? Start by removing the lever located at the bottom left of the dashboard and lift the bonnet, securing i…
How to Replace the Alternator on Ford Kuga
How to Replace the Alternator on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Is the alternator on our Ford Kuga damaged and needs replacing? Here’s how to do it. Open the front bonnet, remove the fuel filter along with all hos…
How to open the trunk of the Ford Kuga
How to open the trunk of the Ford Kuga
Ford Kuga (2020-2026 / MK 3) When the easy opening feature was placed on a Ford Kuga vehicle, it became one of the most used and well-received innovations at Ford. To open and cl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos