Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs on Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Spark plugs

How to replace damaged spark plugs in the Ford Fiesta? Lift the bonnet and secure it. Remove the engine soundproofing panel, disconnect the coils, and use your socket wrench to unscrew the spark plugs, pulling them out of the cylinder head. Clean the surface of the engine and remove any dirt (cover the holes for safety). Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them, and reconnect the ignition coils. Start the vehicle for a functionality test. Close the bonnet after maintenance.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Spark Plugs on a Ford Fiesta
How to Replace Spark Plugs on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Remove the spark plugs from a Ford Fiesta: open the engine bay, lift the bonnet, and secure it with the prop rod. Remove the coils from the engine he…
How to Replace the Spark Plugs in a Ford Fiesta?
How to Replace the Spark Plugs in a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the spark plugs in a Ford Fiesta, open the bonnet to locate the coils at the top of the engine block, just below the windscreen. Remove th…
How to Fit Spark Plugs in a Ford Fiesta
How to Fit Spark Plugs in a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Want to replace the spark plugs on your petrol Ford Fiesta? Open the bonnet by pulling the lever and lift it up, securing it in place. Remove the pla…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos