Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Wheel Bearing on Ford Escort

Model: Ford Escort MK 4 - Years 1990-2000
Part: Bearing

Today, you will learn how to remove and replace the rear wheel bearings of a Ford Escort. First, lift the vehicle and remove the front wheel; then, using a punch, remove the screws from the rear drum and take it off using a puller or by levering it off. Next, remove the hub nut cover by prying it off with a flat screwdriver, and unscrew the bolt with a socket wrench. Finally, extract the wheel bearing and replace it with the original spare part. Now, reassemble the drum and finally the wheel, as shown in the video!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the Ford Escort located?
Where are the fuses of the Ford Escort located?
Ford Escort (1990-2000 / MK 4) The fuses of the Ford Escort are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be po…
Where is the fuse box of the Ford Escort located?
Where is the fuse box of the Ford Escort located?
Ford Escort (1990-2000 / MK 4) Thanks to the following guide, you will finally be able to independently locate the fuse box inside your Ford Escort. First of all, it is necessary f…
What is the fuse diagram for the Ford Escort?
What is the fuse diagram for the Ford Escort?
Ford Escort (1990-2000 / MK 4) In this video, you can find the diagrams of the fuse boxes and their locations in the Ford Escort, useful in case you need to check the status of the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos