Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Alternator Belt on Ford C Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Alternator

See other generations:
Video tutorial

When the alternator belt needs replacing, you will hear a defective noise from it. Remove the engine cover (without losing the clips that secure it), remove the front right wheel and lift the vehicle. Unscrew the Torx screws that secure the protection panel beneath the engine bay and remove it. At this point, loosen the bolts that maintain tension on the belts and remove them, keeping in mind how the new ones will be fitted.

Finally, proceed in reverse order to fit the new belts and all the removed parts.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Replace the Alternator on a Ford C-Max?
How to Replace the Alternator on a Ford C-Max?
Ford C Max (2010-2019 / MK 2) To replace the alternator on a Ford C-Max, open the bonnet to access the components in the engine bay: on the left side, you will find the alternator…
How to Remove the Alternator on a Ford C-Max
How to Remove the Alternator on a Ford C-Max
Ford C Max (2010-2019 / MK 2) To remove the faulty alternator on a Ford C-Max, lift the bonnet and secure it. Locate the battery and disconnect the terminals using the appropriate…
Alternator Replacement for Ford C-Max 1.6 TDCI
Alternator Replacement for Ford C-Max 1.6 TDCI
Ford C Max (2003-2010 / MK 1) Today's guide will illustrate how to disassemble and replace the alternator of the Ford C-Max 1.6 TDCI, following the instructions provided below. Fi…

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos