Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Alternator Replacement for Ford C-Max 1.6 TDCI

Model: Ford C Max MK 1 - Years 2003-2010
Part: Alternator

Today's guide will illustrate how to disassemble and replace the alternator of the Ford C-Max 1.6 TDCI, following the instructions provided below. First, open the car's bonnet and begin by disconnecting both battery terminals; then disconnect the intake hose connected to the throttle body by unscrewing the metal clamp screws, as shown in the video. At this point, remove the serpentine belt and unscrew the fixing screws of the alternator, disconnecting its electrical wiring to remove it; then replace it with the new original one!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Alternator on a Ford C-Max
How to Remove the Alternator on a Ford C-Max
Ford C Max (2010-2019 / MK 2) To remove the faulty alternator on a Ford C-Max, lift the bonnet and secure it. Locate the battery and disconnect the terminals using the appropriate…
How to Replace the Timing Belt on a Ford C-Max 1.6 TDCi
How to Replace the Timing Belt on a Ford C-Max 1.6 TDCi
Ford C Max (2010-2019 / MK 2) .. remove and replace the timing belt on a Ford C-Max 1.6 TDCi. First, open the bonnet of your car and start by removing the cap from the radiator fluid.. …
How to replace the timing belt on the Ford C-Max?
How to replace the timing belt on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To replace the timing belt on the Ford C-Max, lift the car and loosen the bolts securing the front right wheel and the corresponding wheel arch. Once…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos