Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Pump Replacement on Ford Fusion

Model: Ford Fusion MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel pump

Video tutorial

If the fuel tank is at least half full, it is advisable to drain it. For safety reasons, disconnect the negative terminal of the battery. To access the fuel pump, remove the rear seats as shown in the video.

Once done, unscrew the three bolts securing the cover. Clean the area around the pump and prepare some absorbent cloths to avoid damaging the interior with fuel.

Disconnect the connector and the fuel line using a small flat screwdriver. At this point, remove the second cover of the pump and disassemble it.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to find the fuse diagram for a Ford Fusion
Ford Fusion (2002-2012 / MK 1) In this tutorial, you will see the diagram related to the fuses present in a Ford Fusion car. The first fuse box is located inside the vehicle's cabi…
Replacing the Timing Belt on the Ford Fusion 1.4 TDCi
Replacing the Timing Belt on the Ford Fusion 1.4 TDCi
Ford Fusion (2002-2012 / MK 1) Replacing the timing belt is a procedure that requires a lot of patience and particular attention; let's see how to carry out the replacement on the …
How to Replace the Key Battery in a Ford Fusion
How to Replace the Key Battery in a Ford Fusion
Ford Fusion (2002-2012 / MK 1) To replace the battery in the key/remote of a Ford Fusion, lift the metal key and insert a flat-head screwdriver into the opening to remove the remot…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos