Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement on the Ford Transit MK6

Model: Ford Transit MK 6 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Oil filter

See other generations:
Video tutorial

Follow these step-by-step instructions to carry out the routine maintenance oil change on the sixth-generation Ford Transit. First, lift the vehicle and start by removing the oil drain plug located on the sump, using a socket spanner; allow the oil to drain into a container for about ten minutes.

Next, unscrew the oil filter with a socket spanner, removing and replacing the cartridge with a new one, as shown in the video. Finally, pour in the new oil, following the video to the end!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement on Ford Transit 2.2 MK7
Ford Transit (2006-2014 / MK 7) In today's tutorial video, you will learn how to replace the engine oil and oil filter on the Ford Transit MK7 with a 2.2 litre engine. First, gather…
How to Perform a Service (Oil and Oil Filter Change) on the Ford Transit MK7
How to Perform a Service (Oil and Oil Filter Change) on the Ford Transit MK7
Ford Transit (2006-2014 / MK 7) In this video, find step-by-step instructions to carry out the routine maintenance service by replacing the engine oil and oil filter on the seventh …
How to Change the Oil on a Ford Transit MK7
How to Change the Oil on a Ford Transit MK7
Ford Transit (2006-2014 / MK 7) In this guide, you will learn how to change the engine oil on a Ford Transit MK7. Before starting to remove the old oil, lift the dipstick and remove…

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos