|
Do it yourself
| |||
| ||||
How to Change the Injectors on the Ford Fiesta 1.4 TdCi
Model: Ford Fiesta
Fiesta 5, MK 5, MK V
- Years 2002-2008
To change the injectors, you need to remove: the coolant reservoir, the EGR pipe, the fuel filter, the air filter housing, the air intake pipe, and the valve cover. Remove the coolant reservoir using 7 mm bolts, then disconnect the cables near the reservoir, move the reservoir and cables aside, and remove the side cover of the engine. Next, remove the fuel filter using an 8 mm socket and a T25 Torx. Then, disconnect the air intake pipe along with the air filter housing by unplugging the connectors. After that, remove the EGR pipe by unscrewing a bolt with a T30 Torx and one with a 10 mm socket. Disconnect the fuel line going to the valve cover. Now you can remove the valve cover by taking off the 8 mm bolts and one 10 mm bolt at the back; gently lift off the cover to access the injectors by removing the 13, 15, and 17 mm nuts. Take out the injector, the seal, and clean the injector seat. Apply grease to the seal, insert the new injector, reconnect the various pipes and connections, and reassemble everything in the reverse order of disassembly.
Updated on 5 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
To replace the injectors on a Ford Fiesta 1.6 TDCi, open the bonnet to access the components at the top of the engine block after removing the plasti…
Ford Fiesta
(2002-2008 /
Fiesta 5, MK 5, MK V)
In this video tutorial, you will learn how to remove and replace the diesel injectors on the sixth series Ford Fiesta with a 1.6 TDCI engine. First, …
Ford Fiesta
(2002-2008 /
Fiesta 5, MK 5, MK V)
This guide provides the main instructions for removing and replacing the fuel injectors of the Ford Fiesta 1.4 TDCi. First, open the bonnet of your c…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.116
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
