Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Mount on the Ford Escape 1.6 TDCI

Model: Ford Escape MK 3 - Years 2013-2019
Part: Engine mount

In today's tutorial video, you will learn how to remove and replace the engine mount on the Ford Escape 1.6 TDCI Titanium, following the instructions below. First, open the hood and start by removing the screw from the engine coolant reservoir to take it out; underneath, you will find the engine mount, as shown in the video. At this point, lift the engine with a jack so you can remove the engine mount; unscrew its mounting bolts using a socket wrench to take it out and replace it with the new one!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to temporarily install the license plate and license plate holder of the Ford Escape
How to temporarily install the license plate and license plate holder of the Ford Escape
Ford Escape (2020-2026 / MK 4) These short and simple instructions will guide us on how to install the license plate and license plate holder of the Ford Escape, using a temporary …
How to Install the Front License Plate on a Ford Escape
How to Install the Front License Plate on a Ford Escape
Ford Escape (2013-2019 / MK 3) Follow this brief guide to install the license plate holder and front license plate on your Ford Escape. First, move to the front of your vehicle and…
How to Replace the Starter Motor in a Ford Escape?
How to Replace the Starter Motor in a Ford Escape?
Ford Escape (2013-2019 / MK 3) In this tutorial, you will see how to replace the starter motor in a Ford Escape, a simple task that requires good manual skills. First, open the hoo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos