Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor in a Ford Escape?

Model: Ford Escape MK 3 - Years 2013-2019
Part: Starter motor

In this tutorial, you will see how to replace the starter motor in a Ford Escape, a simple task that requires good manual skills. First, open the hood, then disconnect the negative terminal of the battery. Lift the front of the vehicle and remove the plastic engine cover. Next, remove the intake duct by unscrewing both the upper and lower bolts, disconnect the starter motor power cables, and unscrew the corresponding mounting bolts. At this point, separate the starter motor from the bracket, position the replacement part, and reassemble everything by following the reverse procedure.

Posted on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the 2005 Ford Escape?
Where is the OBD port located on the 2005 Ford Escape?
Ford Escape (2001-2007 / MK 1) Being able to locate the OBD port in your first-generation Ford Escape (year 2005) on your own is really easy, and thanks to the instructions in the …
How to Replace the Cabin Air Filter of the Ford Escape
How to Replace the Cabin Air Filter of the Ford Escape
Ford Escape (2013-2019 / MK 3) Unlike many other car models, in the Ford Escape, the cabin air filter is not located inside the passenger glove compartment but in the engine compar…
How to Replace the Air Filter on a Ford Escape
How to Replace the Air Filter on a Ford Escape
Ford Escape (2013-2019 / MK 3) To replace the air filter on a Ford Escape, open the hood and locate the air filter box on the right side of the engine compartment. To open the box,…

Other guides you may be interested in

    Frequently Asked Questions

    • Escape 2008-2012 - Why isn't the starter motor of the Ford Escape working anymore? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos