Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Injectors

Model: Ford Transit MK 7 - Years 2006-2014
Part: Fuel injectors

Injectors are the evolution of carburettors. When they clog or wear out, they must be replaced as they would no longer ensure adequate fuel supply, causing the engine to lose revs. To carry out the removal procedure, you need a socket wrench. An injector consists of a nozzle, a valve, and a pump that exerts fuel pressure. Using the socket wrench, deactivate the fuel system by disconnecting the negative battery cable and removing the electrical connector and the fuel intake hose connected to the intake manifold. Before installing the new injectors, it is essential to add new oil.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Injectors from a Ford Transit?
How to Remove the Injectors from a Ford Transit?
Ford Transit (2000-2006 / MK 6) To remove the injectors from a Ford Transit, open the bonnet to access the engine bay: the injectors will be located at the top of the engine, just b…
How do you replace the injectors of the Ford Transit?
How do you replace the injectors of the Ford Transit?
Ford Transit (2014-2024 / MK 8) In order to replace the injectors of the Ford Transit, you need to open the hood so that you can access the components located inside the engine comp…
Injector Removal Tutorial on Ford Transit
Injector Removal Tutorial on Ford Transit
Ford Transit (2014-2024 / MK 8) Let’s look at removing the injectors on the Ford Transit. Pull the lever to open the engine bay and lift the front bonnet, securing it. Remove the en…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos