Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Throttle Body Replacement Instructions

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Throttle body

See other generations:
Video tutorial

The throttle body is a device located along the intake duct and functions to partially restrict the flow of air depending on the engine speed: it may happen that the throttle mechanism jams, which consists of plastic gears. Replacing the throttle body is very simple; just disconnect the intake duct hose, the actuator connector, and remove the fastening pins from the intake manifold; take care with the gasket during installation.

It may be necessary to initialise the system via diagnostics.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plugs on a Ford Transit
Replacing the Spark Plugs on a Ford Transit
Ford Transit (2014-2024 / MK 8) Discover the main steps to remove and replace the spark plugs on a Ford Transit in this guide. First, open the bonnet and start by removing the intak…
Replacing the Diesel Filter on a Ford Transit MK VII
Replacing the Diesel Filter on a Ford Transit MK VII
Ford Transit (2006-2014 / MK 7) To prevent dirt from entering the fuel system of the Ford Transit MK VII with the diesel, a specific filter is installed that must be replaced period…
How to clean the EGR valve of the Ford Transit
How to clean the EGR valve of the Ford Transit
Ford Transit (2014-2024 / MK 8) The first thing we need to clean an EGR valve is a specific cleaner, like the Arexons that we can find on Amazon with the code B01FY0IDDQ at the pric…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos