Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. F-150
    4. : How to reset the engine oil life light on the 2018 Ford F150

Ford F-150 - Video tutorial

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Engine oil
Operation: How to reset the engine oil life light on the 2018 Ford F150

The guide shows how to reset the engine oil life warning light on the 2018 Ford F150. This can be done with the vehicle running or off. Using the directional arrows on the left of the steering wheel, scroll through the tabs to the system menu and scroll down to settings. Select the advanced settings tab and then enter the vehicle tab. On this page it will be necessary to use the arrow upwards to reach the voice of the reset of the life of the engine oil. Press and hold the â € œokâ € key to perform the reset. Exit the menu at the end of the operation.


Posted on 17 June 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • F 150 2009-2014 - How many liters of oil go in a Ford F150 4.6 V8? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos