Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of a 2004 Ford Explorer

Model: Ford Explorer MK 3, U152 - Years: 2002, 2003, 2004, 2005
Part: Front bumper

See other generations:
Video tutorial

The video shows how to remove the front bumper of a 2004 Ford Explorer. This operation can be carried out without the need for a mechanic.

Remove the screws and the central plastic clip that secures the bumper to the headlight mounting panel. Remove the two screws and the clip at the bottom, which anchor the bumper to the inner wing.

Then remove the two 10 millimetre bolts located underneath, which hold the bumper to the radiator support bar. The bumper is now completely loose. Finally, remove the fog lights to extract the bumper.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Ford Explorer?
How to Remove the Rear Bumper of the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) To remove the rear bumper of the Ford Explorer, open the tailgate to access the screws securing the rear lights. Once these screws are loosened, you …
Replacing the Front Manufacturer's Badge on a Ford Explorer
Replacing the Front Manufacturer's Badge on a Ford Explorer
Ford Explorer (2020-2026 / MK 6, U625) Below, you will find instructions that will allow you to remove and replace the front manufacturer's badge on a Ford Explorer. First, open the bonnet…
How to Remove the Rear Bumper of a Ford Explorer?
How to Remove the Rear Bumper of a Ford Explorer?
Ford Explorer (2006-2010 / MK 4, U251) To replace the rear bumper of a Ford Explorer, open the tailgate so you can loosen the bolts securing the rear lights in their housings. Once these b…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos