Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford Transit?

Model: Ford Transit MK 7 - Years 2006-2014
Part: Service warning light

To reset the service light on the Ford Transit, press and hold the brake and accelerator pedals while the ignition is off. With the pedals held down, turn the key to the ignition position. Wait for about fifteen seconds until the spanner light starts to flash. Once it begins to flash, you can release the pedals and turn off the ignition. When you turn the ignition back on, you will see that the service light has been reset correctly, and you can turn it off again.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Transit
How to Reset the Service Light on a Ford Transit
Ford Transit (2006-2014 / MK 7) Let’s see how to reset the service light on a Ford Transit without a display menu. This is the classic Ford system using the pedal combination; press…
How to Reset the Service Light on a Ford Transit
How to Reset the Service Light on a Ford Transit
Ford Transit (2000-2006 / MK 6) Resetting the service light on a Ford Transit is a very simple operation that can be carried out with just a few easy steps and independently, thanks…
How to Reset the Service Light on a Ford Transit
How to Reset the Service Light on a Ford Transit
Ford Transit (2014-2024 / MK 8) Here’s how to reset the service light on a Ford Transit: first, turn on the ignition without starting the engine, then press the accelerator and brak…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos