Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : Where is the Ford Escape fuse box located

Ford Escape - Video tutorial

Model: Ford Escape MK 2 - Years 2008-2012
Part: Fuse box
Operation: Where is the Ford Escape fuse box located

The fuse box is the electrical heart of the car and thanks to it it is possible to intervene in a simple and targeted way on the various electrical components that make up the vehicle. Before you find out where the box of your Ford Escape is, make sure you have left the engine off and disconnected the battery. Then go inside the vehicle (passenger side) and locate the small plastic cover in the lower area of the dashboard. Remove it with the help of a small flat screwdriver and immediately below you will have access to the fuse box you were looking for.


Posted on 4 August 2022 by ScegliAuto



Where is the fuse box of the Ford Escape 2006 located?
Ford Escape (2001-2007 / MK 1) In this new guide of ours, we will discover where the fuse box is located in your first generation Ford Escape (year 2006). First of all, the car mus
How to open the fuse box of the Ford Escape?
Ford Escape (2013-2019 / MK 3) The Ford Escape has two fuse boxes inside, both accessible independently. To access the fuse box located in the front hood, near the battery, it is n
What is the fuse diagram on the Ford Escape?
Ford Escape (2013-2019 / MK 3) In this video we can see the position of the fuse boxes of the Ford Escape and the relative diagrams, useful in the event that one of the various dev

Other guides that may interest you

    Frequently Asked Questions

    • Escape 2001-2007 - Why are the exterior lights of the Ford Escape not working? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos