Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the High-Pressure Fuel Pump on a Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Fuel pump

To replace the high-pressure fuel pump on a Ford Fiesta, lift the car and remove the front right wheel by loosening the corresponding bolts. This will allow you to align the crankshaft pulley. Next, open the bonnet and remove the air duct by unscrewing its bolts and disconnecting the connectors. This will enable you to detach the plastic cover from the top of the engine block and access the pump located at its rear: unscrew its fixing bolts and disconnect the connectors to remove the old pump and replace it.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) In this guide, we will cover the main instructions on how to remove and replace the fuel pump on the Ford Fiesta, as well as the Ka and Mondeo. First…
How to Remove the Fuel Pump from a Ford Fiesta
How to Remove the Fuel Pump from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove the fuel pump from a Ford Fiesta? First, disconnect the battery cables and lift the car on a column lift. Use a socket spanner to undo …
Guide to disassembling the fuel pump of the Ford Fiesta
Guide to disassembling the fuel pump of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Shortly, we will see the main instructions that will allow us to disassemble and replace the fuel pump or the float of the Ford Fiesta. First of all,…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - Where is the diesel pump located on the Ford Fiesta 1.4 Tdci? Read answer
    • Fiesta 2008-2017 - Where is the Ford Fiesta fuel pump located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos