Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Ranger

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Service warning light

In this very short video tutorial, see how to reset the service light on a Ford Ranger, model produced from 2012 to 2018. This operation should be performed every time you change the engine oil and its filter. First, insert the key into the ignition without turning it. Now, press and hold the brake and accelerator pedals. Once done, turn the key to the first position to activate the instrument panel. You will see the oil light start to flash, indicating that the reset is in progress. Wait for it to finish, and the reset will be complete.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2023 Ford Ranger
How to Reset the Service Light on the 2023 Ford Ranger
Ford Ranger (2022-2026 / P703, RA) Today, you will see how to reset the service light on a 2023 Ford Ranger vehicle. Turn off the instrument cluster of the vehicle and press the accele…
How to reset the oil service light on a Ford Ranger?
How to reset the oil service light on a Ford Ranger?
Ford Ranger (2011-2023 / T6, P375, PX) In this tutorial, you will see how to reset the oil service light on a Ford Ranger, a very simple and quick operation to perform only after completin…
How to reset the service light on the Ford Ranger
How to reset the service light on the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) For the manual reset of the service light on the display of the instrument panel of your Ford Ranger, you do not necessarily need to seek the help of…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos