Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs in a Ford F-250?

Model: Ford F-250 P473 - Years 2011-2016
Part: Spark plugs

To replace the spark plugs in a Ford F-250, lift the hood to access the components underneath. Disconnect all connectors on top of the engine block that are connected to the ignition coils. Once the connectors are disconnected, you can remove the ignition coils from their housings and then extract the underlying spark plugs using a socket wrench. After the old spark plugs are removed, install the new ones, reattach the coils, and connect them.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Mirror Bulb on a Ford F-250
How to Replace the Mirror Bulb on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the mirror bulb on a Ford F-250, use a screwdriver to pry between the cap and the glass of the mirror. This will allow you to remove the s…
How to Replace the Air Filter on a Ford F-250
How to Replace the Air Filter on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the cabin filter on a Ford F-250, open the hood to locate the filter box inside the engine compartment: it is positioned at the front, nea…
How to Replace the Air Filter on a Ford F-250
How to Replace the Air Filter on a Ford F-250
Ford F-250 (1999-2007 / Phn131) To replace the air filter on a Ford F-250, open the hood to access the engine compartment: the air filter is located inside, directly under the coola…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos