Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Why has the "SYNC" system of the Ford Kuga stopped working?

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
This video is currently unavailable

If the "SYNC" navigation system of the Ford Kuga has suddenly stopped functioning, first check the status of the respective fuses, the location of which is indicated in this video. As shown, the first fuse is located in the box inside the engine compartment, right next to the battery, and is labelled F67. The second and last fuse is located in the box positioned on the left wall of the boot and is labelled F14. If faulty, ensure you use replacements with the same amperage to avoid damaging the connected devices.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

What to do when Sync 3 is not working on a Ford Kuga
What to do when Sync 3 is not working on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) In this video, see what to do if Sync 3 is not working on a Ford Kuga: it acts like a computer, so if it occasionally misbehaves, such as not reading…
Removing Sync 2 Onboard Computer on Ford Kuga MK2
Removing Sync 2 Onboard Computer on Ford Kuga MK2
Ford Kuga (2012-2019 / MK 2, C520) This video shows how to remove and replace the multimedia system or Sync 2 onboard computer on a Ford Kuga second generation. First, get inside the v…
Removing Sync 3 Navigation System on Ford Kuga 2019
Ford Kuga (2012-2019 / MK 2, C520) In today's tutorial video, we will see how to remove the onboard computer or Sync navigation system on a 2019 Ford Kuga, following these simple instr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos