Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve in a Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: EGR valve

See other generations:
Video tutorial

In this tutorial, see how to replace the EGR valve in a Ford Focus, a straightforward task if you have good manual skills. First, wait for the engine to cool down, then open the bonnet and remove the protective cover in front of the windscreen.

Next, disconnect both the connector and the various pipes from the fuel filter, unscrew the fastening screws, and take it out of its housing. At this point, you will have access to the EGR valve, which can be removed by unscrewing the relevant bolts.

To install the replacement, simply follow the reverse procedure.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Replacing the EGR Valve on a Ford Focus
Replacing the EGR Valve on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The EGR valve should be replaced if damaged or if you have issues with your car, here’s how to remove it on a Ford Focus. Lift the engine bonnet and …
How to disassemble the EGR valve of the Ford Focus 1.6 TDCi
How to disassemble the EGR valve of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) Below we will see the main instructions on how to dismantle and replace the EGR valve of the Ford Focus 1.6 TDCi. First, we open the hood of the car …
How to replace the EGR valve of a Ford Focus MK2
How to replace the EGR valve of a Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, we will see how to change the EGR valve on a Ford Focus MK2: we open the hood and lift the engine cover; the EGR valve is located righ…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos