|
Do it yourself
| |||
| ||||
How to Perform a Service and Oil Change on a Ford C-Max
Model: Ford C Max
MK 2
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
This video shows you how to perform a service and oil change on a Ford C-Max. Check the label attached to the inner edge of the door for when the last service was done and what work was completed. Three operations that should be done regularly to keep the engine in good condition are 1) Oil change, 2) Oil filter change, and 3) Air filter change. Start by opening the oil cap located in the engine bay. Next, remove the pipe that blocks access to the oil filter and use a spanner to loosen the oil filter, allowing it to drain the oil inside. Lift the car on a ramp and first unscrew the protective panel, then the oil drain plug to drain the old oil. Once all the oil is drained, close everything up and lower the car. Proceed to introduce the new oil through the filler neck in the engine bay and replace the oil filter and air filter as shown in the video.
Updated on 25 June 2026 by ScegliAuto
Related tutorials
Ford C Max
(2010-2019 /
MK 2)
In this video tutorial, see how to reset the service light on a 2017 Ford C-Max by following a few simple steps that will allow you to manage your ve…
Ford C Max
(2010-2019 /
MK 2)
In this brief tutorial, learn how to reset the service light related to the engine oil change on a second-generation Ford C Max, produced from 2010 t…
Ford C Max
(2010-2019 /
MK 2)
To reset the oil light on a Ford C-Max, turn on the ignition without starting the engine: the display will show "oil change required" or the oil ligh…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to open the boot if it is stuck on a Mercedes B-Class?
On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.152
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
