|
Do it yourself
| |||
| ||||
How to get to the filter of a Ford 2.0 TDCi Duratorq engine
Model: Ford C Max
MK 2
- Years 2010-2019
In this video we can see how to reach the oil filter on a 2.0 TDCi Duratorq engine, notoriously located in a very inconvenient position under the intake manifold, and it is difficult to access it with traditional tools. We will need a 27mm socket, a nut and bolt with a 14mm head, a socket wrench or flexible extension, and a standard socket wrench for the fastening bolt. We lift the car with a jack, and if we find it obstructing, we remove the air intake manifold, and we build our tool: we insert a bolt into the 27mm socket, screw a nut onto the top of the bolt and tighten it well; in this way the socket becomes a sort of handle, which we will position on the oil filter head; we use a 14mm socket wrench to turn the socket counterclockwise. Once loosened, we completely unscrew the filter cover by hand; we remove the filter cartridge and clean the housing with a cloth. We insert the new cartridge, which we will lubricate with engine oil, screw the cover by hand and tighten it slightly with the DIY tool. Then we add engine oil and start the engine for a couple of minutes, in order to check for any leaks.
Posted on 15 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Ford C Max
(2003-2010 /
MK 1)
Let’s look at replacing the diesel filter on the Ford C-Max with the necessary components. Lift the front bonnet of the car to access the diesel filt…
Ford C Max
(2010-2019 /
MK 2)
Let's summarise how to remove and replace the timing belt on a Ford C-Max 1.6 TDCi. First, open the bonnet of your car and start by removing the cap …
Ford C Max
(2003-2010 /
MK 1)
Today's guide will illustrate how to disassemble and replace the alternator of the Ford C-Max 1.6 TDCI, following the instructions provided below. Fi…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.134
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
