Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on a Ford Transit MK8

Model: Ford Transit MK 8 - Years 2014-2024
Part: Service warning light

In this video, see how to reset the service light on a Ford Transit MK8. First, turn on the ignition by simply turning the key to the on position, without starting the engine. If there are any messages, you will need to clear them by pressing OK. Then, press and hold down the accelerator and brake pedals simultaneously. The dashboard will indicate that the service reset is in progress. Keep both pedals pressed until it tells you that it is complete. This operation may take about 20 seconds. When the message appears, you can release the pedals and you’re done.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2014-2024 / MK 8) In this video, we will see how to reset the maintenance lights on a Ford Transit MK8: you need to use the buttons located on the right side of the st…
Ford Transit (2014-2024 / MK 8) This brief guide provides instructions on how to reset the service light for routine maintenance on the Ford Transit. First, get inside the vehicle a…
Ford Transit (2014-2024 / MK 8) To reset the Oil Service light on a Ford Transit, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is lit up, pres…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos