Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford Puma 2020

Model: Ford Puma MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

The engine oil light that appears on the dashboard of your 2020 Ford Puma usually turns off automatically once the oil change is performed. If this does not happen, do not worry, as you can manually eliminate it by following these steps.

The first thing to do is to turn on the instrument panel. There is no need to start the engine to complete the reset of the light.

Next, enter the onboard computer menu and select "Settings". At this point, go to "Vehicle" and select "Oil Life". Finally, press and hold "OK" until the light reset is complete.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Ford Puma
How to reset the service light on the Ford Puma
Ford Puma (2019-2026 / MK 1) In this video, you can see how to reset the service light on a Ford Puma: first, turn on the ignition, then use the button on the right of the steeri…
How to reset the oil light on the 2020 Ford Puma
How to reset the oil light on the 2020 Ford Puma
Ford Puma (2019-2026 / MK 1) In the following guide you will find all the various steps you need to follow if you intend to carry out the manual reset of the engine oil light on …
How to Reset the Service Light on a Ford Puma
How to Reset the Service Light on a Ford Puma
Ford Puma (2019-2026 / MK 1) Here’s how to reset the service light for a Ford Puma: turn on the ignition and use the left and right buttons on the steering wheel to navigate the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos