Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Ford Focus EcoBoost

Model: Ford Focus MK 3 - Years 2011-2018
Part: Service warning light

If you want to manually reset the engine oil light on your Ford Focus EcoBoost third generation (2011-2018) but don’t know how, don’t worry as you will find all the instructions you need below. First, get inside the vehicle and turn on the ignition. Immediately press the menu button located on the right side of the steering wheel and enter the vehicle settings. At this point, select the "Information" option. Scroll down and this time select the "Oil life" option. Finally, press and hold the "OK" button until the reset of the light is complete.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the High-Pressure Fuel Pump on Ford Focus 2.0T Ecoboost
Replacing the High-Pressure Fuel Pump on Ford Focus 2.0T Ecoboost
Ford Focus (2011-2018 / MK 3) Today, we will discover the instructions and steps to remove and replace the high-pressure fuel pump on the Ford Focus 2.0T Ecoboost. First, open the…
How to Replace the Timing Belt on the Ford Focus 1.0 EcoBoost?
How to Replace the Timing Belt on the Ford Focus 1.0 EcoBoost?
Ford Focus (2011-2018 / MK 3) To replace the timing belt on the Ford Focus 1.0 EcoBoost, loosen the bolts securing the front right wheel of the car so that it can be removed along…
How do you replace the timing belt of the Ford Focus 1.0 EcoBoost?
How do you replace the timing belt of the Ford Focus 1.0 EcoBoost?
Ford Focus (2011-2018 / MK 3) In order to replace the timing belt of the Ford Focus 1.0 EcoBoost, you need to loosen the screws that hold the right front wheel of the car, which w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos