Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Ford Bronco?

Model: Ford Bronco U725 - Years 2021-2026
Part: Engine oil

Thanks to the significant ground clearance of this vehicle, you do not need a lift or jack stands to change the oil. You can go directly under the vehicle and remove the metal panel covering the oil pan. Once it is exposed, place a container underneath to catch the fluids and unscrew the plug so that the old engine oil drains out, then re-tighten it. The oil filter is located near the wheel and is easily accessible after lifting the wheel well cover. Replace it before pouring the new engine oil through the designated filler.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service Light on a Ford Bronco
How to Reset the Oil Service Light on a Ford Bronco
Ford Bronco (2021-2026 / U725) In this tutorial, you will learn how to reset the oil service light on a Ford Bronco, a very simple and quick operation to perform only after complet…
Where is the fuse box of the Ford Bronco located?
Where is the fuse box of the Ford Bronco located?
Ford Bronco (2021-2026 / U725) If you own the new Ford Bronco and want to find out where the fuse box containing all the car's fuses is located, all you have to do is pay attention…
Where to Find the Cabin Fuses of the Ford Bronco
Where to Find the Cabin Fuses of the Ford Bronco
Ford Bronco (2021-2026 / U725) If you don't know where the box containing all the cabin fuses of your new Ford Bronco is located, don't worry because you just need to follow the st…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos