Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the crankshaft pulley on the Ford C-MAX?

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
This video is currently unavailable

In this tutorial, you will see how to replace the crankshaft pulley on the Ford C-MAX, a simple operation if you have good manual skills. First, lift the front right side of the engine, then remove both the wheel and the inner wheel arch cover.

Next, locate the pulley in question, undo the large central fixing bolt with an 18mm socket, and separate it from the shaft. At this point, you can position the replacement part, tighten the bolt with thread lock, and attach the belt, preferably a new one.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

When to Change the Timing Belt on a Ford C-Max
When to Change the Timing Belt on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Only attempt to replace the timing belt yourself if you have a good understanding of general mechanics: a simple mistake could severely damage the en…
How to Replace the Key Battery on a Ford C-Max
How to Replace the Key Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the top side of the key fob for your Ford C-Max, then lever it open. Next, dise…
Where to find and how to access the fuse box of a Ford C-Max?
Where to find and how to access the fuse box of a Ford C-Max?
Ford C Max (2003-2010 / MK 1) The fuse box of your Ford C-Max is located beneath the glove compartment of the front passenger side. To access it, start by opening the front passen…

    Frequently Asked Questions

    • C Max 2010-2019 - Why is the tire sensor not detected on the Ford C Max? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos