Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Engine Oil Change Light on the Ford Focus

Model: Ford Focus MK 4 - Years 2018-2025
Part: Service warning light

Through these steps, you will see how to reset the service light for the regular maintenance of the engine oil change on the Ford Focus. First, get in the vehicle and turn on the instrument panel by pressing the ignition button once; then wait for the maintenance warning message to appear on the instrument panel display, as shown in the video. At this point, press and hold the accelerator pedal until the display shows that the reset is in progress; then wait for the maintenance key to reset completely!

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Ford Focus
How to reset the service light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will explain how to independently reset the service light, related to the oil change of the Ford Focus produced from 2012 to 2018. To reset …
Resetting the engine oil light on the Ford Focus
Resetting the engine oil light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today, discover the procedure to reset the service light for the engine oil change on the Ford Focus. First, get in the vehicle and turn on the ignit…
How to reset the oil light on the Ford Focus
How to reset the oil light on the Ford Focus
Ford Focus (2011-2018 / MK 3) The service light reset on a Ford vehicle must be performed after completing all the operations included in the car service. On Ford Focus vehicles, …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos