Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windshield Washer Fluid Reservoir from the Ford Escape

Model: Ford Escape MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007

See other generations:
Video tutorial

Today, you will learn how to remove and replace the windshield washer fluid reservoir on the Ford Escape. First, open the hood of your vehicle and start unscrewing the mounting screws located at the top of the bumper grille.

Next, unscrew the additional screws found on both sides of the front wheel wells, as shown in the video. At this point, remove the front bumper to access the reservoir; disconnect the fluid hose and unscrew its mounting screws to remove it and replace it with the new one, then reassemble everything!


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Replace the Windshield Washer Reservoir in a Ford Escape?
How to Replace the Windshield Washer Reservoir in a Ford Escape?
Ford Escape (2008-2012 / MK 2) In this tutorial, you will see how to replace the windshield washer reservoir in a Ford Escape. First, open the hood, then remove the two bolts locat…
How to Remove the Battery from a Ford Escape Mk3
How to Remove the Battery from a Ford Escape Mk3
Ford Escape (2013-2019 / MK 3) This guide shows how to replace the battery in a Ford Escape Mk3. You do not need to remove the air filter box to perform this operation. After openi…
How do you replace the windshield wiper blades of the Ford Escape?
How do you replace the windshield wiper blades of the Ford Escape?
Ford Escape (2013-2019 / MK 3) In order to replace the windshield wiper blades of the Ford Escape, you need to lift the wiper arms so that they are no longer in contact with the wi…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos