Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Reservoir in a Ford Escape?

Model: Ford Escape MK 2 - Years 2008-2012
Part: Checks and maintenance

In this tutorial, you will see how to replace the windshield washer reservoir in a Ford Escape. First, open the hood, then remove the two bolts located on the edge of the grille with a 10mm socket wrench. Next, remove the clips inside the wheel well, unscrew the additional bolts, and disconnect the fog light connectors. At this point, you can unclip the bumper from the frame, remove the washer pump, and take out the reservoir. To install the replacement and reassemble everything, simply follow the reverse procedure.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Windshield Washer Fluid Reservoir from the Ford Escape
How to Remove the Windshield Washer Fluid Reservoir from the Ford Escape
Ford Escape (2001-2007 / MK 1) Today, you will learn how to remove and replace the windshield washer fluid reservoir on the Ford Escape. First, open the hood of your vehicle and st…
How to Refill the Coolant in a Ford Escape
How to Refill the Coolant in a Ford Escape
Ford Escape (2013-2019 / MK 3) In this video, learn how to change the antifreeze in a Ford Escape MK3. The coolant is orange, specifically for this type of North American vehicles,…
How to Replace the Engine Mount on the Ford Escape 1.6 TDCI
How to Replace the Engine Mount on the Ford Escape 1.6 TDCI
Ford Escape (2013-2019 / MK 3) In today's tutorial video, you will learn how to remove and replace the engine mount on the Ford Escape 1.6 TDCI Titanium, following the instructions…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos