Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Ford Transit Van?

Model: Ford Transit MK 8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

This tutorial shows how to reset the engine oil change light on a Ford Transit van, a very simple and quick operation to be performed only after completing the required scheduled maintenance. Start by entering the cabin, then insert the key but leave it in the initial position.

Press both the brake and accelerator pedals, turn on the instrument cluster while keeping both pedals pressed until the reset is complete. Restart the vehicle and check that the operation was successful.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service on a Ford Transit Van?
How to Reset the Oil Service on a Ford Transit Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, you will see how to reset the oil service on a Ford Transit van, a very simple operation. Before doing this, you must have complete…
How to reset the oil service on the Ford Transit van?
How to reset the oil service on the Ford Transit van?
Ford Transit (2000-2006 / MK 6) In this tutorial, you will learn how to reset the oil service on the Ford Transit van, a very simple and quick operation to perform only after comple…
How to Reset the Oil Service Light in a Ford Transit Van?
How to Reset the Oil Service Light in a Ford Transit Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, see how to reset the oil service light in a Ford Transit van, a very simple and quick operation to perform only after completing th…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos