Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford S Max?

Model: Ford S Max MK 1 - Years 2006-2016
Part: Service warning light

Before starting, ensure all doors of the car are fully closed. Turn the key to the ON position to activate the instrument cluster, and simultaneously press the brake and accelerator pedals. Hold them down for at least 15 seconds. After this brief period, press the "OK" button located on the control panel on the right side of the steering wheel, the exact position of which is also shown in the accompanying video. The service light should now be off, allowing you to release the pedals and turn off the instrument cluster.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Ford S Max
How to reset the service light on the Ford S Max
Ford S Max (2006-2016 / MK 1) Resetting the service light on a 2006 Ford S Max vehicle is a simple and quick procedure that can be done independently. The service light not only i…
How to reset the service light on a 2011 Ford S Max
How to reset the service light on a 2011 Ford S Max
Ford S Max (2006-2016 / MK 1) When the service light of the Ford S Max turns on, it means that we need to perform the car service on the vehicle and then reset the light. To reset…
How to Reset the Service Light on a Ford S-MAX
How to Reset the Service Light on a Ford S-MAX
Ford S Max (2006-2016 / MK 1) In this short tutorial, see how to reset the service light on a first-generation Ford S-MAX, produced from 2006 to 2016. Resetting this light is very…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos