Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Valve Cover Gasket on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Checks and maintenance

To replace the valve cover gasket on a Ford Fiesta, open the bonnet to access the components inside the engine bay. You will need to remove the ignition coils from their housings, followed by the spark plugs underneath. At this point, loosen the screws that secure the valve cover so that it can be completely detached. Now, remove the gasket located at the base of the cover, allowing you to insert a new one while reassembling all previously removed components.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Valve Cover Gasket on the Ford Fiesta?
How to Replace the Valve Cover Gasket on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the valve cover gasket, open the bonnet to access the engine bay and loosen all the screws securing the valve cover. Once the screws are l…
Replacing the Rocker Cover Gasket
Replacing the Rocker Cover Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before applying the new rocker cover gasket, clean the gasket seating thoroughly, both on the cylinder head side and the cover side, removing any dir…
Replacing the Rocker Cover Gasket
Replacing the Rocker Cover Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before applying the new gasket to the rocker cover, it is essential to clean the gasket seating, both on the cover side and the cylinder head side, f…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos