Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery on Ford S-Max and Galaxy MK1

Model: Ford S Max MK 1 - Years 2006-2016
Part: Battery

In this video, you will see how to replace the battery in a Ford S-Max (or a Galaxy, the procedure is identical). The battery is located at the rear left of the engine bay. Between the battery and the fuse box, there is a point where you can disconnect the battery; isolate the cable with a piece of rubber tubing. To improve access, it is recommended to remove the air filter box and disconnect the wiring, then remove the duct and finally lift the air filter housing from its supports. Disconnect the connectors from the panel and remove the plastic cover from the battery. Unscrew the cable and disconnect the positive terminal, isolating the clamp. Open the lifting handles and remove the battery from its housing. Now you can disconnect the negative terminal. For reassembly, start by connecting the negative terminal, then apply some grease; place the battery back in its seat and reattach the retaining clamp. Reconnect the positive terminal and apply grease to this as well, remount the plastic cover and position the connector block. Remove the piece of plastic tubing placed earlier and tighten the earth cable. Now reposition the air filter assembly, connecting the cable, the plug, and the duct. Job done.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford S Max (2006-2016 / MK 1) Today, you will see how to remove the gear knob from a Ford S-Max (model from 2006 to 2015) and a Galaxy, specifically the automatic gear knob. First…
Ford S Max (2006-2016 / MK 1) In this video, we will see the location and diagram of the fuse boxes in the S-Max/Galaxy 2006/2016. As per the classic Ford layout, the cabin fuse b…
Ford S Max (2006-2016 / MK 1) In this video tutorial, see how to replace the cabin filter in a Ford Galaxy S-MAX 3 by following a few simple steps: first, purchase a new cabin fil…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos