Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on 2014 Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Service warning light

With this guide, you will finally be able to manually reset the oil light that appears on the instrument cluster of your 2014 Ford F-150. First, enter the cabin and turn on the ignition after inserting the key. Next, press the menu button located on the steering wheel and then enter the vehicle settings. Once there, locate the "Oil life reset" option and hold down the "OK" button until the reset of the light is successfully completed. When finished, exit the menu and turn off the ignition.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford F-150
How to Reset the Service Light on a Ford F-150
Ford F-150 (2015-2020 / MK 13) To reset the Service light on a Ford F-150, turn on the ignition by turning the key. Then, use the controls on the left steering wheel to navigate to…
How to Change the Engine Oil and Oil Filter of the Ford F-150
How to Change the Engine Oil and Oil Filter of the Ford F-150
Ford F-150 (2009-2014 / MK 12) Below are the steps necessary to replace the engine oil and oil filter while performing routine maintenance on the Ford F-150. First, lift the vehicl…
How to reset the oil light on the Ford F 150
How to reset the oil light on the Ford F 150
Ford F-150 (2021-2026 / MK 14) To complete the manual reset procedure of the oil light on your Ford F 150, you just need to follow a few simple steps. First, reach the driver's sea…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos