Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the battery located in the Ford Transit Connect van?

Model: Ford Transit MK 8 - Years 2014-2024
Part: Battery

In this video we can see where the battery is located in the Ford Transit Connect van and how to proceed in case we need to replace it, a very simple and quick operation. As shown, the battery is located in the classic engine compartment housing, just behind the air filter box which will need to be removed. To remove the battery, make sure first that the key is not inserted, then loosen the terminal nuts and disconnect them starting from the negative terminal. Finally, unscrew the fixing bracket bolt, remove the battery and install the replacement.

Posted on 23 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the 2018 Ford Transit Connect
Where to Find the Fuse Box of the 2018 Ford Transit Connect
Ford Transit (2014-2024 / MK 8) If one or more fuses in your 2018 Ford Transit Connect are blown and you want to replace them, follow the instructions in this mini guide to easily l…
Where are the fuses located on the Ford Transit Connect?
Where are the fuses located on the Ford Transit Connect?
Ford Transit (2006-2014 / MK 7) On the Ford Transit Connect, the fuses are contained within dedicated fuse boxes installed on the vehicle: in this type of vehicle, you can find two …
How to replace the fuel filter in the Ford Transit Connect van?
How to replace the fuel filter in the Ford Transit Connect van?
Ford Transit (2014-2024 / MK 8) In this tutorial we can see how to replace the fuel filter in the Ford Transit Connect van, an extremely simple and quick operation. First of all, ma…

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2014-2024 - Where is the battery in the Ford Transit? Read answer
    • Transit 2014-2024 - Where is the Ford Transit Custom battery located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos