Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a 2019 GMC Canyon

Model: GMC Canyon MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tire pressure warning light

See other generations:
Video tutorial

The VXDAS El-50448 is the tool for resetting the tire pressure light, usable on GMC Canyon vehicles produced from 2015 to 2022. This tool can be purchased online on Amazon for $10.00. To reset the light, turn on the ignition and press the menu button on the steering wheel to access the general settings by pressing the selector.

Navigate through the menu until you select the tire pressure option; hold down the Select button for a few seconds.

The vehicle will emit two beeps, allowing you to proceed with updating the tire pressures as the vehicle has entered "learning mode." Position the reset tool as close as possible to the tire valve near the TPMS sensor, and each time the vehicle beeps, move to the next sensor.

At the end of the procedure, restart the instrument cluster.


Posted on 28 April 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a GMC Canyon
How to Reset the Oil Light on a GMC Canyon
GMC Canyon (2004-2012 / MK 1) To reset the engine oil light on your GMC Canyon, follow these few simple steps. First, get inside the vehicle and insert the key to turn on the inst…
How to Replace the Dome Light Bulbs of the GMC Canyon
How to Replace the Dome Light Bulbs of the GMC Canyon
GMC Canyon (2015-2022 / MK 2) This guide provides instructions to remove and replace the bulbs of the interior dome light of the GMC Canyon. First, get in the vehicle and start re…
How to Replace the Remote Battery in a GMC Canyon?
How to Replace the Remote Battery in a GMC Canyon?
GMC Canyon (2004-2012 / MK 1) Replacing the remote battery in a GMC Canyon, as shown in this tutorial, is an extremely simple and quick task. For this, you will need a small flath…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos