Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag from the Holden Trax

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Airbag

Video tutorial

To remove the steering wheel airbag from the Holden Trax, use an object to pry in the back of the steering wheel, inside the grooves located in this position. By prying here, you can release the internal clips that secure the airbag in its place: then you can disconnect the connectors at its back and completely remove the airbag.

At this point, you can connect the connectors at the back of the airbag, inserting it into the center of the steering wheel so that it locks in place.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Holden Trax?
How to Change the Engine Oil in a Holden Trax?
Chevrolet Trax (2013-2020 / MK 1) To change the engine oil in the Holden Trax, access the underside of the engine bay where the engine oil drain plug is located. This must be unscrewe…
How to Replace the Exterior Door Handle on the Holden Trax?
How to Replace the Exterior Door Handle on the Holden Trax?
Chevrolet Trax (2013-2020 / MK 1) To replace the exterior door handle on the Holden Trax, open the door so you can detach the circular rubber piece on the side of the door. Once this …
How to Replace the Front Bulb on a Holden Trax
How to Replace the Front Bulb on a Holden Trax
Chevrolet Trax (2013-2020 / MK 1) In today's video, we will show you how to replace the headlight bulb on a Holden Trax. This video also applies to its twin, the Chevrolet Trax, and t…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos